How to Reset Glo MiFi or Router (All Models in 2025)

How to Reset Glo MiFi or Router (All Models in 2025) 

Learn how to reset any Glo MiFi or router device in 2025 – including Huawei, ZTE, and generic Glo routers – using reset buttons, admin dashboard, or USSD codes.

Why Reset Your Glo MiFi or Router?

Resetting your Glo MiFi or router can fix:

• Slow internet connection
• Wrong APN settings
• Forgotten password
• Firmware glitches
• Network detection issues

A full reset restores your device to factory settings, erasing saved WiFi names, passwords, and APN setups.

 

Method 1: Use the Reset Button (Hardware Reset)

Most Glo MiFi and router models come with a physical reset button.

Steps:

1. Locate the reset hole – usually beside the power port or under the device.
2. Insert a pin or paperclip into the hole.
3. Press and hold the button for 10–15 seconds.
4. Wait for the device to restart. It will reset to factory default.

Default login after reset:

• Username: admin
• Password: admin (or leave blank)

Method 2: Reset via Admin Dashboard

If you can still access the dashboard, you can reset from the device interface.

How to Access the Dashboard:

1. Connect to the MiFi/WiFi network
2. Open your browser and visit:

http://192.168.8.1 (Huawei)
http://192.168.0.1 (ZTE)
http://192.168.1.1 (Generic Glo routers)

3. Log in (default credentials: admin/admin)
4. Go to Settings > System > Restore Defaults
5. Click Reset and confirm

Method 3: USSD or App Reset (Where Supported)

Some modern Glo routers support management via the Glo Router App or a web portal. If available:

1. Open the app or portal
2. Navigate to Settings > Reset Device
3. Tap Reset and confirm

Not all Glo MiFi models support app-based reset.

 

Pro Tip: Reconfigure After Reset

Once reset, reconfigure the following:

• WiFi name and password
• APN settings (set to gloflat)
• Change admin password for security
• Turn off auto-firmware updates (optional)

👉 See Best Glo APN Settings for Fast Internet in 2025

FAQs

Q: Will resetting my Glo MiFi delete my data bundle?
A: No. Resetting only affects device settings, not your SIM card or data balance.

Q: My device keeps blinking red after reset. What should I do?
A: Reinsert the SIM, reconfigure the APN settings (gloflat), and reboot.

Q: What is the default Glo router login after reset?
A: Username: admin, Password: admin (or leave blank for some models).

Whether your Glo MiFi is misbehaving or you just forgot your password, resetting the device is an effective fix. Follow the steps above based on your router model and enjoy a smoother experience.

Related Posts:

Previous article

Next Post

Next article

Previous Post

Suleiman Inuwa

https://www.androidpols.com.ng/

I am a professional website developer and also an SEO expert.