Glo MiFi Troubleshooting Tips for Slow Connection (2025 Guide)

Glo MiFi Troubleshooting Tips for Slow Connection (2025 Guide) 

Is your Glo MiFi connection slow? Discover the top reasons for poor Glo MiFi speed and learn how to fix it using proven 2025 troubleshooting tricks.

Why Is Your Glo MiFi Slow?

Glo MiFi offers portable internet on the go, but slow speed can result from:

• Weak signal strength
• Wrong APN settings
• Outdated firmware
• Network congestion
• Data exhaustion
• Incorrect band/frequency

Let’s walk through how to fix these issues one by one.

1. Check Your Signal Bars

Your MiFi should show at least 3 bars for strong speed.

Fix:

• Move closer to a window or higher ground.
• Avoid placing MiFi near electronics like microwaves or TVs.
• Consider using a signal booster antenna if available.

2. Use the Correct Glo APN Settings

Wrong APN slows your connection or causes no internet at all.

Glo Recommended APN (2025):

• Name: Glo NG
• APN: gloflat
• Username & Password: Leave blank
• APN type: default

How to Configure:

• Log in to MiFi Dashboard: Visit http://192.168.8.1 or 192.168.0.1
• Username/Password: Usually admin/admin
• Go to Settings > Profile Management, then update APN

3. Change Network Mode to 4G Only

If MiFi is on “Auto,” it might keep switching between 3G and 4G.

Fix:

• In dashboard, go to: Settings > Network Mode
• Set to: 4G Only or LTE Only

4. Reduce Connected Devices

Too many users = slow speed. Glo MiFi supports up to 10 devices, but fewer is better.

Fix:

• Disconnect idle devices
• Change password to stop unauthorized users

5. Monitor Your Data Balance

Slow speeds may mean you’ve run out of data.

Check Balance:

• SMS INFO to 127 using MiFi SMS portal
• Or log into Glo Café App:
  👉 Download on Play Store

6. Clear Device Cache & Restart MiFi

Sometimes a simple restart clears background tasks and speeds things up.

• Turn off MiFi for 30 seconds
• Turn it back on

Also, reboot connected phones/laptops.

7. Update MiFi Firmware

Manufacturers release updates to fix speed and connectivity issues.

Fix:

• Log into dashboard > Check Device Info > Firmware Update

Make sure you back up settings before updating.

8. Use External Antennas (If Supported)

Some Glo MiFi models have antenna ports (TS-9 or SMA). Plug in external LTE antennas to boost signal.

9. Switch Location or Use a Different SIM Slot

Some areas have better 4G coverage. If possible, try:

• Another room or floor
• Different Glo SIM with active data

If none of these work, your MiFi might be outdated or have a hardware issue. Consider upgrading to a newer model with 4G LTE Cat 6 or 5G support for better performance.

Related Posts:

Previous article

Next Post

Next article

Previous Post

Suleiman Inuwa

https://www.androidpols.com.ng/

I am a professional website developer and also an SEO expert.